Jobell

For those time you want to ride with bells on (or off). Go from bell to no bell in seconds Dummy cap included Replaces traditional round headset top cap Brass bells have the best tone! MOUNTING INSTRUCTIONS Step One: Remove old top cap. With a the correct sized allen wrench, remove the bolt securing the top cap to the fork. The Jobell is designed to use the standard M6x1.0 Cap Screw bolt. If your old top cap uses this style retain the bolt for later use. The top cap should come off easily, but you may have to loosen the stem bolts. Step Two: Measure for correct depth. Most likely your old top cap will have the same dimensions as the Jobell Top Cap, but if not, you will need about 3-4 mm of depth from the upper edge of the stem or stem spacer down to the top of the fork steerer tube. If ...